Dog House Plans

Dog House Drawing and Materials List

Intro | Drawing/Materials | Floor and Walls | Roof | Deck

Drawing

Here is a drawing that depicts the dog house from the front, side, top (without roof), and the base. Note that the house extends beyond the base by 5/8" (the thickness of the T1-11 plywood).



 

Materials List

The primary ingredients for the house are 5/8" T1-11 plywood (2 sheets), 1/2" plywood (one smooth side), 2X3 studs, and 2X2 studs.

Description Qty Size Material
    Thick. Width Length  
Front/back walls - exterior 2 5/8" 30" 35-1/4" T1-11 plywood
Side walls - exterior 2 5/8" 23-3/4" 31-3/4" T1-11 plywood
Roof - exterior 2 5/8" 22" 39" T1-11 plywood
Deck roof 1 5/8" 18" 26" T1-11 plywood
Side walls - interior 2 1/2" 23" 31-3/4" Exterior plywood
Front/back walls - interior 2 1/2" 24-7/8" 30-1/2" Exterior plywood
Floor 1 1/2" 28-3/4" 31-3/4" Exterior plywood
Roof panels - interior 2 1/4" 15-1/2" 32" Exterior plywood
Interior privacy wall 1 1/2" 12" 24" Exterior plywood
Ridge beam 1 1-1/2" 2-1/2" 31-3/4" 2 x 3 studs
Concealed fascias 2 1-1/2" 2-1/2" 28-3/4" 2 x 3 studs
Rafters 6 1-1/2" 2-1/2" 18" 2 x 3 studs
Side wall frame - horizontal 4 1-1/2" 1-1/2" 31-3/4" 2 x 2 studs
Side wall frame - vertical 4 1-1/2" 1-1/2" 20" 2 x 2 studs
Front/Rear wall frame - vertical 4 1-1/2" 1-1/2" 22-1/2" 2 x 2 studs
Front/Rear wall frame - horizontal 4 1-1/2" 1-1/2" 22" 2 x 2 studs
Front/Rear wall frame - peak 4 1-1/2" 1-1/2" 15" 2 x 2 studs
Door frame - left side 1 1-1/2" 1-1/2" 20" 2 x 2 stud
Door frame - arch header 1 1-1/2" 7-1/2" 11" 2 x 8 stud
Base frame - front/back 2 3/4" 2-1/2" 28-3/4" Cedar
Base frame- sides, center 3 3/4" 2-1/2" 30-1/4" Cedar
Corner trim 8 3/4" 3" 28" Cedar
Deck frame - front/back 2 3/4" 1-3/4" 25-1/2" Cedar
Deck frame - sides 2 3/4" 1-1/2" 16" Cedar
Deck roof frame - front/back 2 3/4" 1-1/2" 25-1/2" Cedar
Deck roof frame - sides 2 3/4" 1-1/2" 17" Cedar
Deck roof supports 4 3/4" 1-1/2" 23" Cedar

 

 
Copyright All About Dog Houses - Woof, woof